Pairs
0/3
none scrapped
Hours
0.0
against 11.1h estimated
Material issued
$0
of $4,568 planned
Scrap off the saw
5.05kg
3 cut plans run
Off the remnant rack
12.2m
metal not bought new
Routing
Standard minutes against booked, work centre by work centre.
| Seq | Work centre | What happens | Who | Status | Std | Booked | Variance |
|---|---|---|---|---|---|---|---|
| 1 | CUT | Cutting — 4 rails at 3300mm, 24 rungs at 524mm | — | Waiting | 96 min | — | — |
| 2 | DRILL | Drilling — Rail jig, headplate and pin holes | — | Waiting | 62 min | — | — |
| 3 | WELD | Welding — 48 rung joins, 2 headplates | — | Waiting | 239 min | — | — |
| 4 | ASSY | Assembly — Nose, lugs, pins, ID plate | — | Waiting | 87 min | — | — |
| 5 | INSP | Inspection — Proof load and dimensional check | — | Waiting | 100 min | — | — |
| 6 | PACK | Packing — Bearers, strap, wrap, label | — | Waiting | 79 min | — | — |
Cutting and nesting
What has to be cut to length, and how it was nested onto bar and remnant.
| Profile | Pieces | Cut to | Total length | Cut plan | Yield | Off the rack |
|---|---|---|---|---|---|---|
| EXT-200-SR 200 Series side rail extrusion | 12 | 3,300mm | 39.60m | CP-26-0402 | 99.5% | 1 · 3.3m |
| EXT-NOSE Nose / toe extrusion | 6 | 500mm | 3.00m | CP-26-0404 | 99.0% | 1 · 3.0m |
| EXT-RUNG-HD Heavy duty rung — Hyway profile | 72 | 524mm | 37.73m | CP-26-0403 | 95.1% | 1 · 5.8m |
Material
Required against issued, priced at what the buyer last paid.
| Code | Material | Bin | Required | Issued | On hand | Cost |
|---|---|---|---|---|---|---|
| GAS-ARG | Argon E-size cylinder | RM-E1 | 0.271 ea | 0.000 | 9.42 | $25.98 |
| WIRE-5356 | 5356 MIG wire 1.2mm, 7kg spool | RM-E1 | 0.135 spool | 0.000 | 20.76 | $15.97 |
| EXT-200-SR | 200 Series side rail extrusion 12 at 3300mm | RM-A1 | 39.600 m | 0.000 | 240.50 | $2,526.48 |
| EXT-NOSE | Nose / toe extrusion 6 at 500mm | RM-B1 | 3.000 m | 0.000 | 265.20 | $58.35 |
| EXT-RUNG-HD | Heavy duty rung — Hyway profile 72 at 524mm | RM-B1 | 37.728 m | 0.000 | 465.80 | $975.27 |
| PLATE-ID | Serial identification plate | RM-D1 | 6.000 ea | 0.000 | 434.26 | $25.20 |
| RIVET-4 | 4mm rivet, stainless, pack of 500 | RM-D1 | 0.024 pack | 0.000 | 12.05 | $1.78 |
| STRAP-PP | 19mm poly strapping, 1000m coil | RM-E1 | 0.036 coil | 0.000 | 5.80 | $3.10 |
| TIMB-BEAR | Timber bearer 100×50, 1.2m | RM-E1 | 6.000 ea | 0.000 | 247.68 | $44.40 |
| WRAP-PAL | Pallet wrap 500mm × 400m | RM-E1 | 0.150 roll | 0.000 | 34.27 | $3.23 |
| PIN-14-S | 14mm steel pin, zinc plated | RM-D1 | 12.000 ea | 0.000 | 423.19 | $139.20 |
| PIN-CHAIN | Pin retaining chain, 300mm | RM-D1 | 12.000 ea | 0.000 | 725.03 | $46.80 |
| PL-GUSS-6 | 6mm gusset plate 1200×600 | RM-C1 | 0.300 sheet | 0.000 | 18.00 | $45.60 |
| PL-HP-10 | 10mm headplate plate 2500×1250 | RM-C1 | 0.600 sheet | 0.000 | 4.05 | $657.00 |
| Planned material | $4,568.36 | |||||
Labour booked
0.0 hours off the floor against this order.
Nothing booked yet.