Cut plan CP-26-0403

Yield

95.1%

of the metal used up

First-pass use

89.1%

before anything went back

Scrap

3.81kg

$50 of metal

Off the rack

5.82m

$150 not bought new

Back on the rack

2.51m returned

How it nested

Each length that was opened, what came out of it, and what was left.

Cut 524mm · 5mm kerf · 30mm end trim on a new bar

Remnant RMN-0156 5,833mm 11 × 524mm 14mm → Scrap

Mill length 7300mm mill length 7,300mm 13 × 524mm 393mm → Scrap

393mm

Mill length 7300mm mill length 7,300mm 13 × 524mm 393mm → Scrap

393mm

Mill length 7300mm mill length 7,300mm 13 × 524mm 393mm → Scrap

393mm

Mill length 7300mm mill length 7,300mm 13 × 524mm 393mm → Scrap

393mm

Mill length 7300mm mill length 7,300mm 9 × 524mm 2,509mm → New remnant RMN-0164

2509mm

into the ramp saw kerf back on the rack scrap end trim

The cut list

What the saw operator works from.

#	Take from	Its length	Cuts	At	Left	Then
1	Remnant RMN-0156	5,833mm	11	524mm	14mm	Scrap
2	Mill length 7300mm mill length	7,300mm	13	524mm	393mm	Scrap
3	Mill length 7300mm mill length	7,300mm	13	524mm	393mm	Scrap
4	Mill length 7300mm mill length	7,300mm	13	524mm	393mm	Scrap
5	Mill length 7300mm mill length	7,300mm	13	524mm	393mm	Scrap
6	Mill length 7300mm mill length	7,300mm	9	524mm	2,509mm	New remnant RMN-0164
Total			72	37.73m	4.46m