Cut plan CP-26-0402

Yield

99.5%

of the metal used up

First-pass use

83.8%

before anything went back

Scrap

1.19kg

$13 of metal

Off the rack

3.31m

$211 not bought new

Back on the rack

7.27m returned

How it nested

Each length that was opened, what came out of it, and what was left.

Cut 3300mm · 5mm kerf · 30mm end trim on a new bar

Remnant RMN-0001 3,450mm 1 × 3,300mm 145mm → Scrap

3300

Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0158

3300

660mm

Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0159

3300

660mm

Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0160

3300

660mm

Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0161

3300

660mm

Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0162

3300

660mm

Mill length 7300mm mill length 7,300mm 1 × 3,300mm 3,965mm → New remnant RMN-0163

3300

3965mm

into the ramp saw kerf back on the rack scrap end trim

The cut list

What the saw operator works from.

#	Take from	Its length	Cuts	At	Left	Then
1	Remnant RMN-0001	3,450mm	1	3,300mm	145mm	Scrap
2	Mill length 7300mm mill length	7,300mm	2	3,300mm	660mm	New remnant RMN-0158
3	Mill length 7300mm mill length	7,300mm	2	3,300mm	660mm	New remnant RMN-0159
4	Mill length 7300mm mill length	7,300mm	2	3,300mm	660mm	New remnant RMN-0160
5	Mill length 7300mm mill length	7,300mm	2	3,300mm	660mm	New remnant RMN-0161
6	Mill length 7300mm mill length	7,300mm	2	3,300mm	660mm	New remnant RMN-0162
7	Mill length 7300mm mill length	7,300mm	1	3,300mm	3,965mm	New remnant RMN-0163
Total			12	39.60m	7.47m