Pairs
2/2
none scrapped
Hours
7.7
against 7.4h estimated
Material issued
$1,888
of $1,888 planned
Scrap off the saw
5.22kg
3 cut plans run
Off the remnant rack
9.2m
metal not bought new
Routing
Standard minutes against booked, work centre by work centre.
| Seq | Work centre | What happens | Who | Status | Std | Booked | Variance |
|---|---|---|---|---|---|---|---|
| 1 | CUT | Cutting — 4 rails at 3300mm, 22 rungs at 374mm | Harinder Singh | Done | 66 min | 74 | +12% |
| 2 | DRILL | Drilling — Rail jig, headplate and pin holes | Harinder Singh | Done | 42 min | 48 | +14% |
| 3 | WELD | Welding — 44 rung joins, 2 headplates | Dion Field | Done | 154 min | 175 | +14% |
| 4 | ASSY | Assembly — Nose, lugs, pins, ID plate | Harinder Singh | Done | 58 min | 52 | -10% |
| 5 | INSP | Inspection — Proof load and dimensional check | Oliver Brewer | Done | 70 min | 64 | -9% |
| 6 | PACK | Packing — Bearers, strap, wrap, label | Nick Kennedy | Running | 54 min | 31 | -43% |
Cutting and nesting
What has to be cut to length, and how it was nested onto bar and remnant.
| Profile | Pieces | Cut to | Total length | Cut plan | Yield | Off the rack |
|---|---|---|---|---|---|---|
| EXT-125-SR 125 Series side rail extrusion | 8 | 3,300mm | 26.40m | CP-26-0387 | 96.0% | 2 · 6.6m |
| EXT-NOSE Nose / toe extrusion | 4 | 350mm | 1.40m | CP-26-0389 | 98.6% | 1 · 1.4m |
| EXT-RUNG-HD Heavy duty rung — Hyway profile | 44 | 374mm | 16.46m | CP-26-0388 | 96.1% | 1 · 1.1m |
Material
Required against issued, priced at what the buyer last paid.
| Code | Material | Bin | Required | Issued | On hand | Cost |
|---|---|---|---|---|---|---|
| GAS-ARG | Argon E-size cylinder | RM-E1 | 0.172 ea | 0.172 | 9.42 | $16.49 |
| WIRE-5356 | 5356 MIG wire 1.2mm, 7kg spool | RM-E1 | 0.086 spool | 0.086 | 20.76 | $10.15 |
| EXT-125-SR | 125 Series side rail extrusion 8 at 3300mm | RM-A2 | 26.400 m | 26.400 | 482.50 | $1,030.92 |
| EXT-NOSE | Nose / toe extrusion 4 at 350mm | RM-B1 | 1.400 m | 1.400 | 279.80 | $27.23 |
| EXT-RUNG-HD | Heavy duty rung — Hyway profile 44 at 374mm | RM-B1 | 16.456 m | 16.456 | -119.30 | $425.39 |
| PLATE-ID | Serial identification plate | RM-D1 | 4.000 ea | 4.000 | 434.26 | $16.80 |
| RIVET-4 | 4mm rivet, stainless, pack of 500 | RM-D1 | 0.016 pack | 0.016 | 12.05 | $1.18 |
| STRAP-PP | 19mm poly strapping, 1000m coil | RM-E1 | 0.024 coil | 0.024 | 5.80 | $2.06 |
| TIMB-BEAR | Timber bearer 100×50, 1.2m | RM-E1 | 4.000 ea | 4.000 | 247.68 | $29.60 |
| WRAP-PAL | Pallet wrap 500mm × 400m | RM-E1 | 0.100 roll | 0.100 | 20.67 | $2.15 |
| PIN-14-S | 14mm steel pin, zinc plated | RM-D1 | 4.000 ea | 4.000 | 423.19 | $46.40 |
| PIN-CHAIN | Pin retaining chain, 300mm | RM-D1 | 4.000 ea | 4.000 | 725.03 | $15.60 |
| PL-GUSS-6 | 6mm gusset plate 1200×600 | RM-C1 | 0.200 sheet | 0.200 | 13.40 | $30.40 |
| PL-HP-8 | 8mm headplate plate 2500×1250 | RM-C1 | 0.267 sheet | 0.267 | 14.05 | $233.54 |
| Planned material | $1,887.91 | |||||
Labour booked
7.4 hours off the floor against this order.
| Date | Who | Work centre | Minutes | Done | Scrap | Note |
|---|---|---|---|---|---|---|
| 19 Aug | Nick Kennedy | PACK | 31 | — | — | |
| 19 Aug | Oliver Brewer | INSP | 64 | 2 | — | |
| 19 Aug | Harinder Singh | DRILL | 48 | 2 | — | |
| 18 Aug | Harinder Singh | ASSY | 52 | 2 | — | |
| 18 Aug | Dion Field | WELD | 175 | 2 | — | |
| 18 Aug | Harinder Singh | CUT | 74 | 2 | — |
Ramps built
One serial per ramp, with the batch it came from and who signed it off.
| Serial | Built | Capacity | Length | Batch | Welder | Inspected | Status |
|---|---|---|---|---|---|---|---|
| HY-26-41238 | 14 Jul | 3,000kg | 3.3m | VUA-24942 | Nelson De Villa | Oliver Brewer | In stock |
| HY-26-41239 | 13 Jul | 3,000kg | 3.3m | VUA-24914 | Nelson De Villa | Oliver Brewer | In stock |
| HY-26-41240 | 21 Jul | 3,000kg | 3.3m | VUA-24748 | Nelson De Villa | Oliver Brewer | In stock |
| HY-26-41241 | 14 Jul | 3,000kg | 3.3m | VUA-24379 | Nelson De Villa | Oliver Brewer | In stock |