Yield
96.0%
of the metal used up
First-pass use
89.3%
before anything went back
Scrap
3.87kg
$43 of metal
Off the rack
6.61m
$258 not bought new
Back on the rack
3
1.98m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0015 3,760mm 1 × 3,300mm 455mm → Scrap
3300
455mm
Remnant RMN-0018 3,900mm 1 × 3,300mm 595mm → Scrap
3300
595mm
Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0139
3300
3300
660mm
Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0140
3300
3300
660mm
Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0141
3300
3300
660mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0015 | 3,760mm | 1 | 3,300mm | 455mm | Scrap |
| 2 | Remnant RMN-0018 | 3,900mm | 1 | 3,300mm | 595mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 2 | 3,300mm | 660mm | New remnant RMN-0139 |
| 4 | Mill length 7300mm mill length | 7,300mm | 2 | 3,300mm | 660mm | New remnant RMN-0140 |
| 5 | Mill length 7300mm mill length | 7,300mm | 2 | 3,300mm | 660mm | New remnant RMN-0141 |
| Total | 8 | 26.40m | 3.07m | |||