Yield
96.1%
of the metal used up
First-pass use
70.5%
before anything went back
Scrap
1.32kg
$17 of metal
Off the rack
1.14m
$29 not bought new
Back on the rack
1
6.13m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0106 1,451mm 3 × 374mm 314mm → Scrap
374
374
374
314mm
Mill length 7300mm mill length 7,300mm 19 × 374mm 69mm → Scrap
Mill length 7300mm mill length 7,300mm 19 × 374mm 69mm → Scrap
Mill length 7300mm mill length 7,300mm 3 × 374mm 6,133mm → New remnant RMN-0142
374
374
374
6133mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0106 | 1,451mm | 3 | 374mm | 314mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 19 | 374mm | 69mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 19 | 374mm | 69mm | Scrap |
| 4 | Mill length 7300mm mill length | 7,300mm | 3 | 374mm | 6,133mm | New remnant RMN-0142 |
| Total | 44 | 16.46m | 6.81m | |||