This order is held: deposit outstanding and drawing not approved
Custom work does not go to the floor until the deposit has been received and the customer has signed off the general arrangement drawing. Clear both on HJ-2026-0139 and it releases itself onto the schedule.
Open HJ-2026-0139 →Pairs
0/1
none scrapped
Hours
0.0
against 2.9h estimated
Material issued
$0
of $381 planned
Scrap off the saw
0.00kg
0 cut plans run
Off the remnant rack
0.0m
metal not bought new
Routing
Standard minutes against booked, work centre by work centre.
| Seq | Work centre | What happens | Who | Status | Std | Booked | Variance |
|---|---|---|---|---|---|---|---|
| 1 | CUT | Cutting — 4 rails at 1800mm, 12 rungs at 374mm | Harinder Singh | Waiting | 27 min | — | — |
| 2 | DRILL | Drilling — Rail jig, headplate and pin holes | Harinder Singh | Waiting | 18 min | — | — |
| 3 | WELD | Welding — 24 rung joins, 2 headplates | Nelson De Villa | Waiting | 51 min | — | — |
| 4 | ASSY | Assembly — Nose, lugs, pins, ID plate | Harinder Singh | Waiting | 23 min | — | — |
| 5 | INSP | Inspection — Dimensional check and weld inspection | Oliver Brewer | Waiting | 32 min | — | — |
| 6 | PACK | Packing — Bearers, strap, wrap, label | Nick Kennedy | Waiting | 20 min | — | — |
Cutting and nesting
What has to be cut to length, and how it was nested onto bar and remnant.
| Profile | Pieces | Cut to | Total length | Cut plan | Yield | Off the rack |
|---|---|---|---|---|---|---|
| EXT-L75-SR L75 side rail extrusion | 4 | 1,800mm | 7.20m | Not run | — | — |
| EXT-NOSE Nose / toe extrusion | 2 | 350mm | 0.70m | Not run | — | — |
| EXT-RUNG-LT Light rung — Hyway profile | 12 | 374mm | 4.49m | Not run | — | — |
Material
Required against issued, priced at what the buyer last paid.
| Code | Material | Bin | Required | Issued | On hand | Cost |
|---|---|---|---|---|---|---|
| GAS-ARG | Argon E-size cylinder | RM-E1 | 0.064 ea | 0.000 | 9.42 | $6.17 |
| WIRE-5356 | 5356 MIG wire 1.2mm, 7kg spool | RM-E1 | 0.032 spool | 0.000 | 20.76 | $3.80 |
| EXT-L75-SR | L75 side rail extrusion 4 at 1800mm | RM-A3 | 7.200 m | 0.000 | 460.10 | $165.24 |
| EXT-NOSE | Nose / toe extrusion 2 at 350mm | RM-B1 | 0.700 m | 0.000 | 279.80 | $13.62 |
| EXT-RUNG-LT | Light rung — Hyway profile 12 at 374mm | RM-B1 | 4.488 m | 0.000 | 547.70 | $79.44 |
| PLATE-ID | Serial identification plate | RM-D1 | 2.000 ea | 0.000 | 434.26 | $8.40 |
| RIVET-4 | 4mm rivet, stainless, pack of 500 | RM-D1 | 0.008 pack | 0.000 | 12.05 | $0.59 |
| STRAP-PP | 19mm poly strapping, 1000m coil | RM-E1 | 0.012 coil | 0.000 | 5.80 | $1.03 |
| TIMB-BEAR | Timber bearer 100×50, 1.2m | RM-E1 | 2.000 ea | 0.000 | 247.68 | $14.80 |
| WRAP-PAL | Pallet wrap 500mm × 400m | RM-E1 | 0.050 roll | 0.000 | 20.67 | $1.08 |
| PIN-10-S | 10mm steel pin, zinc plated | RM-D1 | 2.000 ea | 0.000 | 443.47 | $16.80 |
| PIN-CHAIN | Pin retaining chain, 300mm | RM-D1 | 2.000 ea | 0.000 | 725.03 | $7.80 |
| PL-HP-6 | 6mm headplate plate 2500×1250 | RM-C1 | 0.095 sheet | 0.000 | 20.23 | $62.55 |
| Planned material | $381.32 | |||||
Labour booked
0.0 hours off the floor against this order.
Nothing booked yet.