200/330
9000kg Aluminium Ramps at 3.3m
On the rack
1
pairs in FG-1
Free to promise
1
0 allocated
List ex GST
$4,615
$5,307 incl GST
Standard cost
$1,877
material and labour
Margin
59.3%
at list
Built to date
2
ramps on the register
Bill of materials
Per pair. Every production order for this model is raised from these lines.
| Code | Material | Qty per pair | Cut to | Pieces | Cost | Note |
|---|---|---|---|---|---|---|
| EXT-200-SR | 200 Series side rail extrusion | 13.2000 m | 3,300mm | 4 | $842.16 | Side rails — 2 per ramp |
| EXT-RUNG-HD | Heavy duty rung — Hyway profile | 12.5760 m | 524mm | 24 | $325.09 | 12 rungs per ramp at 300mm centres |
| EXT-NOSE | Nose / toe extrusion | 1.0000 m | 500mm | 2 | $19.45 | Toe nose |
| PL-HP-10 | 10mm headplate plate 2500×1250 | 0.2000 sheet | — | 2 | $219.00 | Headplates — 10 per sheet |
| PL-GUSS-6 | 6mm gusset plate 1200×600 | 0.1000 sheet | — | 4 | $15.20 | Headplate gussets |
| PIN-14-S | 14mm steel pin, zinc plated | 4.0000 ea | — | 4 | $46.40 | Supplied with the ramps |
| PIN-CHAIN | Pin retaining chain, 300mm | 4.0000 ea | — | — | $15.60 | |
| WIRE-5356 | 5356 MIG wire 1.2mm, 7kg spool | 0.0451 spool | — | — | $5.32 | 7.5m of weld |
| GAS-ARG | Argon E-size cylinder | 0.0902 ea | — | — | $8.66 | |
| PLATE-ID | Serial identification plate | 2.0000 ea | — | — | $8.40 | Serial plate, one per ramp |
| RIVET-4 | 4mm rivet, stainless, pack of 500 | 0.0080 pack | — | — | $0.59 | |
| STRAP-PP | 19mm poly strapping, 1000m coil | 0.0120 coil | — | — | $1.03 | |
| TIMB-BEAR | Timber bearer 100×50, 1.2m | 2.0000 ea | — | — | $14.80 | |
| WRAP-PAL | Pallet wrap 500mm × 400m | 0.0500 roll | — | — | $1.08 | |
| Material per pair | $1,522.78 | |||||
Routing
Setup once per batch, run time per pair.
| Seq | Work centre | What happens | Setup | Run per pair |
|---|---|---|---|---|
| 1 | Cutting | 4 rails at 3300mm, 24 rungs at 524mm | 12 min | 28 min |
| 2 | Drilling | Rail jig, headplate and pin holes | 8 min | 18 min |
| 3 | Welding | 48 rung joins, 2 headplates | 14 min | 75 min |
| 4 | Assembly | Nose, lugs, pins, ID plate | 6 min | 27 min |
| 5 | Inspection | Proof load and dimensional check | 10 min | 30 min |
| 6 | Packing | Bearers, strap, wrap, label | 4 min | 25 min |
Recent builds
The last 2 of this model off the floor.
| Serial | Built | Batch | Status | Warranty to |
|---|---|---|---|---|
| HY-24-41350 | 4 Sep | VUA-23187 | In service | 19 Jun |
| HY-25-41377 | 26 Apr | VUA-21949 | In service | 14 Dec |