Pairs
0/14
none scrapped
Hours
0.0
against 30.8h estimated
Material issued
$0
of $6,885 planned
Scrap off the saw
0.00kg
0 cut plans run
Off the remnant rack
0.0m
metal not bought new
Routing
Standard minutes against booked, work centre by work centre.
| Seq | Work centre | What happens | Who | Status | Std | Booked | Variance |
|---|---|---|---|---|---|---|---|
| 1 | CUT | Cutting — 4 rails at 2700mm, 16 rungs at 374mm | — | Waiting | 250 min | — | — |
| 2 | DRILL | Drilling — Rail jig, headplate and pin holes | — | Waiting | 162 min | — | — |
| 3 | WELD | Welding — 32 rung joins, 2 headplates | — | Waiting | 616 min | — | — |
| 4 | ASSY | Assembly — Nose, lugs, pins, ID plate | — | Waiting | 258 min | — | — |
| 5 | INSP | Inspection — Dimensional check and weld inspection | — | Waiting | 318 min | — | — |
| 6 | PACK | Packing — Bearers, strap, wrap, label | — | Waiting | 242 min | — | — |
Cutting and nesting
What has to be cut to length, and how it was nested onto bar and remnant.
| Profile | Pieces | Cut to | Total length | Cut plan | Yield | Off the rack |
|---|---|---|---|---|---|---|
| EXT-L75-SR L75 side rail extrusion | 56 | 2,700mm | 151.20m | Not run | — | — |
| EXT-NOSE Nose / toe extrusion | 28 | 350mm | 9.80m | Not run | — | — |
| EXT-RUNG-LT Light rung — Hyway profile | 224 | 374mm | 83.78m | Not run | — | — |
Running the plan looks at what is on the remnant rack before it opens a new mill length, takes the shortest piece that will do the job, and puts anything over 600mm back on the rack as a new remnant.
Material
Required against issued, priced at what the buyer last paid.
| Code | Material | Bin | Required | Issued | On hand | Cost |
|---|---|---|---|---|---|---|
| GAS-ARG | Argon E-size cylinder | RM-E1 | 1.022 ea | 0.000 | 9.42 | $98.11 |
| WIRE-5356 | 5356 MIG wire 1.2mm, 7kg spool | RM-E1 | 0.511 spool | 0.000 | 20.76 | $60.30 |
| EXT-L75-SR | L75 side rail extrusion 56 at 2700mm | RM-A3 | 151.200 m | 0.000 | 460.10 | $3,470.04 |
| EXT-NOSE | Nose / toe extrusion 28 at 350mm | RM-B1 | 9.800 m | 0.000 | 265.20 | $190.61 |
| EXT-RUNG-LT | Light rung — Hyway profile 224 at 374mm | RM-B1 | 83.776 m | 0.000 | 547.70 | $1,482.84 |
| PLATE-ID | Serial identification plate | RM-D1 | 28.000 ea | 0.000 | 434.26 | $117.60 |
| RIVET-4 | 4mm rivet, stainless, pack of 500 | RM-D1 | 0.112 pack | 0.000 | 12.05 | $8.29 |
| STRAP-PP | 19mm poly strapping, 1000m coil | RM-E1 | 0.168 coil | 0.000 | 5.80 | $14.45 |
| TIMB-BEAR | Timber bearer 100×50, 1.2m | RM-E1 | 28.000 ea | 0.000 | 247.68 | $207.20 |
| WRAP-PAL | Pallet wrap 500mm × 400m | RM-E1 | 0.700 roll | 0.000 | 34.27 | $15.05 |
| PIN-10-S | 10mm steel pin, zinc plated | RM-D1 | 28.000 ea | 0.000 | 443.47 | $235.20 |
| PIN-CHAIN | Pin retaining chain, 300mm | RM-D1 | 28.000 ea | 0.000 | 725.03 | $109.20 |
| PL-HP-6 | 6mm headplate plate 2500×1250 | RM-C1 | 1.333 sheet | 0.000 | 25.83 | $875.65 |
| Planned material | $6,884.54 | |||||
Labour booked
0.0 hours off the floor against this order.
Nothing booked yet.