This order is held: deposit outstanding and drawing not approved
Custom work does not go to the floor until the deposit has been received and the customer has signed off the general arrangement drawing. Clear both on HJ-2026-0175 and it releases itself onto the schedule.
Open HJ-2026-0175 →Pairs
0/1
none scrapped
Hours
0.0
against 4.4h estimated
Material issued
$0
of $1,627 planned
Scrap off the saw
0.00kg
0 cut plans run
Off the remnant rack
0.0m
metal not bought new
Routing
Standard minutes against booked, work centre by work centre.
| Seq | Work centre | What happens | Who | Status | Std | Booked | Variance |
|---|---|---|---|---|---|---|---|
| 1 | CUT | Cutting — 4 rails at 3600mm, 26 rungs at 524mm | — | Waiting | 41 min | — | — |
| 2 | DRILL | Drilling — Rail jig, headplate and pin holes | — | Waiting | 27 min | — | — |
| 3 | WELD | Welding — 52 rung joins, 2 headplates | — | Waiting | 93 min | — | — |
| 4 | ASSY | Assembly — Nose, lugs, pins, ID plate | — | Waiting | 34 min | — | — |
| 5 | INSP | Inspection — Proof load and dimensional check | — | Waiting | 40 min | — | — |
| 6 | PACK | Packing — Bearers, strap, wrap, label | — | Waiting | 30 min | — | — |
Cutting and nesting
What has to be cut to length, and how it was nested onto bar and remnant.
| Profile | Pieces | Cut to | Total length | Cut plan | Yield | Off the rack |
|---|---|---|---|---|---|---|
| EXT-200-SR 200 Series side rail extrusion | 4 | 3,600mm | 14.40m | Not run | — | — |
| EXT-NOSE Nose / toe extrusion | 2 | 500mm | 1.00m | Not run | — | — |
| EXT-RUNG-HD Heavy duty rung — Hyway profile | 26 | 524mm | 13.62m | Not run | — | — |
Material
Required against issued, priced at what the buyer last paid.
| Code | Material | Bin | Required | Issued | On hand | Cost |
|---|---|---|---|---|---|---|
| GAS-ARG | Argon E-size cylinder | RM-E1 | 0.095 ea | 0.000 | 9.42 | $9.08 |
| WIRE-5356 | 5356 MIG wire 1.2mm, 7kg spool | RM-E1 | 0.047 spool | 0.000 | 20.76 | $5.58 |
| EXT-200-SR | 200 Series side rail extrusion 4 at 3600mm | RM-A1 | 14.400 m | 0.000 | 240.50 | $918.72 |
| EXT-NOSE | Nose / toe extrusion 2 at 500mm | RM-B1 | 1.000 m | 0.000 | 265.20 | $19.45 |
| EXT-RUNG-HD | Heavy duty rung — Hyway profile 26 at 524mm | RM-B1 | 13.624 m | 0.000 | 465.80 | $352.18 |
| PLATE-ID | Serial identification plate | RM-D1 | 2.000 ea | 0.000 | 434.26 | $8.40 |
| RIVET-4 | 4mm rivet, stainless, pack of 500 | RM-D1 | 0.008 pack | 0.000 | 12.05 | $0.59 |
| STRAP-PP | 19mm poly strapping, 1000m coil | RM-E1 | 0.012 coil | 0.000 | 5.80 | $1.03 |
| TIMB-BEAR | Timber bearer 100×50, 1.2m | RM-E1 | 2.000 ea | 0.000 | 247.68 | $14.80 |
| WRAP-PAL | Pallet wrap 500mm × 400m | RM-E1 | 0.050 roll | 0.000 | 34.27 | $1.08 |
| PIN-14-S | 14mm steel pin, zinc plated | RM-D1 | 4.000 ea | 0.000 | 423.19 | $46.40 |
| PIN-CHAIN | Pin retaining chain, 300mm | RM-D1 | 4.000 ea | 0.000 | 725.03 | $15.60 |
| PL-GUSS-6 | 6mm gusset plate 1200×600 | RM-C1 | 0.100 sheet | 0.000 | 18.00 | $15.20 |
| PL-HP-10 | 10mm headplate plate 2500×1250 | RM-C1 | 0.200 sheet | 0.000 | 4.05 | $219.00 |
| Planned material | $1,627.11 | |||||
Labour booked
0.0 hours off the floor against this order.
Nothing booked yet.