Pairs
0/22
none scrapped
Hours
0.0
against 21.8h estimated
Material issued
$0
of $5,420 planned
Scrap off the saw
0.00kg
0 cut plans run
Off the remnant rack
0.0m
metal not bought new
Routing
Standard minutes against booked, work centre by work centre.
| Seq | Work centre | What happens | Who | Status | Std | Booked | Variance |
|---|---|---|---|---|---|---|---|
| 1 | CUT | Cutting — 4 rails at 2100mm, 16 rungs at 264mm | — | Waiting | 188 min | — | — |
| 2 | DRILL | Drilling — Rail jig, headplate and pin holes | — | Waiting | 118 min | — | — |
| 3 | WELD | Welding — 32 rung joins, 2 headplates | — | Waiting | 432 min | — | — |
| 4 | ASSY | Assembly — Nose, lugs, pins, ID plate | — | Waiting | 182 min | — | — |
| 5 | INSP | Inspection — Dimensional check and weld inspection | — | Waiting | 230 min | — | — |
| 6 | PACK | Packing — Bearers, strap, wrap, label | — | Waiting | 158 min | — | — |
Cutting and nesting
What has to be cut to length, and how it was nested onto bar and remnant.
| Profile | Pieces | Cut to | Total length | Cut plan | Yield | Off the rack |
|---|---|---|---|---|---|---|
| EXT-NOSE Nose / toe extrusion | 44 | 240mm | 10.56m | Not run | — | — |
| EXT-RUNG-SM Small machinery rung | 352 | 264mm | 92.93m | Not run | — | — |
| EXT-SM-SR Small machinery side rail | 88 | 2,100mm | 184.80m | Not run | — | — |
Running the plan looks at what is on the remnant rack before it opens a new mill length, takes the shortest piece that will do the job, and puts anything over 600mm back on the rack as a new remnant.
Material
Required against issued, priced at what the buyer last paid.
| Code | Material | Bin | Required | Issued | On hand | Cost |
|---|---|---|---|---|---|---|
| GAS-ARG | Argon E-size cylinder | RM-E1 | 1.606 ea | 0.000 | 9.42 | $154.18 |
| WIRE-4043 | 4043 MIG wire 1.2mm, 7kg spool | RM-E1 | 0.803 spool | 0.000 | 10.18 | $83.51 |
| EXT-NOSE | Nose / toe extrusion 44 at 240mm | RM-B1 | 10.560 m | 0.000 | 265.20 | $205.39 |
| EXT-RUNG-SM | Small machinery rung 352 at 264mm | RM-B1 | 92.928 m | 0.000 | 603.20 | $1,110.49 |
| EXT-SM-SR | Small machinery side rail 88 at 2100mm | RM-A3 | 184.800 m | 0.000 | 534.00 | $2,032.80 |
| PLATE-ID | Serial identification plate | RM-D1 | 44.000 ea | 0.000 | 434.26 | $184.80 |
| RIVET-4 | 4mm rivet, stainless, pack of 500 | RM-D1 | 0.176 pack | 0.000 | 12.05 | $13.02 |
| STRAP-PP | 19mm poly strapping, 1000m coil | RM-E1 | 0.264 coil | 0.000 | 5.80 | $22.70 |
| TIMB-BEAR | Timber bearer 100×50, 1.2m | RM-E1 | 44.000 ea | 0.000 | 247.68 | $325.60 |
| WRAP-PAL | Pallet wrap 500mm × 400m | RM-E1 | 1.100 roll | 0.000 | 34.27 | $23.65 |
| PIN-10-S | 10mm steel pin, zinc plated | RM-D1 | 44.000 ea | 0.000 | 443.47 | $369.60 |
| PIN-CHAIN | Pin retaining chain, 300mm | RM-D1 | 44.000 ea | 0.000 | 725.03 | $171.60 |
| PL-HP-6 | 6mm headplate plate 2500×1250 | RM-C1 | 1.100 sheet | 0.000 | 25.83 | $722.70 |
| Planned material | $5,420.04 | |||||
Labour booked
0.0 hours off the floor against this order.
Nothing booked yet.