Yield
97.9%
of the metal used up
First-pass use
79.4%
before anything went back
Scrap
0.70kg
$9 of metal
Off the rack
6.06m
$157 not bought new
Back on the rack
1
3.86m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0142 6,133mm 16 × 374mm 69mm → Scrap
Mill length 7300mm mill length 7,300mm 19 × 374mm 69mm → Scrap
Mill length 7300mm mill length 7,300mm 9 × 374mm 3,859mm → New remnant RMN-0154
3859mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0142 | 6,133mm | 16 | 374mm | 69mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 19 | 374mm | 69mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 9 | 374mm | 3,859mm | New remnant RMN-0154 |
| Total | 44 | 16.46m | 4.22m | |||