Yield
97.9%
of the metal used up
First-pass use
82.0%
before anything went back
Scrap
0.51kg
$7 of metal
Off the rack
0.00m
$0 not bought new
Back on the rack
1
3.48m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Mill length 7300mm mill length 7,300mm 19 × 374mm 69mm → Scrap
Mill length 7300mm mill length 7,300mm 19 × 374mm 69mm → Scrap
Mill length 7300mm mill length 7,300mm 10 × 374mm 3,480mm → New remnant RMN-0137
3480mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Mill length 7300mm mill length | 7,300mm | 19 | 374mm | 69mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 19 | 374mm | 69mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 10 | 374mm | 3,480mm | New remnant RMN-0137 |
| Total | 48 | 17.95m | 3.86m | |||