Yield
99.8%
of the metal used up
First-pass use
75.2%
before anything went back
Scrap
0.04kg
$0 of metal
Off the rack
4.81m
$110 not bought new
Back on the rack
2
3.12m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0126 5,465mm 2 × 2,400mm 655mm → New remnant RMN-0131
2400
2400
655mm
Mill length 7300mm mill length 7,300mm 2 × 2,400mm 2,460mm → New remnant RMN-0132
2400
2400
2460mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0126 | 5,465mm | 2 | 2,400mm | 655mm | New remnant RMN-0131 |
| 2 | Mill length 7300mm mill length | 7,300mm | 2 | 2,400mm | 2,460mm | New remnant RMN-0132 |
| Total | 4 | 9.60m | 3.14m | |||