Yield
98.5%
of the metal used up
First-pass use
61.2%
before anything went back
Scrap
0.36kg
$4 of metal
Off the rack
6.32m
$195 not bought new
Back on the rack
1
5.17m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0101 2,160mm 1 × 2,100mm 55mm → Scrap
2100
Remnant RMN-0123 4,265mm 2 × 2,100mm 55mm → Scrap
2100
2100
Mill length 7300mm mill length 7,300mm 1 × 2,100mm 5,165mm → New remnant RMN-0128
2100
5165mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0101 | 2,160mm | 1 | 2,100mm | 55mm | Scrap |
| 2 | Remnant RMN-0123 | 4,265mm | 2 | 2,100mm | 55mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 1 | 2,100mm | 5,165mm | New remnant RMN-0128 |
| Total | 4 | 8.40m | 5.30m | |||