Yield
97.0%
of the metal used up
First-pass use
55.2%
before anything went back
Scrap
0.18kg
$2 of metal
Off the rack
0.76m
$13 not bought new
Back on the rack
1
3.48m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0124 835mm 2 × 374mm 77mm → Scrap
374
374
Mill length 7300mm mill length 7,300mm 10 × 374mm 3,480mm → New remnant RMN-0127
3480mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0124 | 835mm | 2 | 374mm | 77mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 10 | 374mm | 3,480mm | New remnant RMN-0127 |
| Total | 12 | 4.49m | 3.62m | |||