Yield
93.7%
of the metal used up
First-pass use
54.6%
before anything went back
Scrap
0.99kg
$11 of metal
Off the rack
5.42m
$124 not bought new
Back on the rack
1
5.47m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0093 1,860mm 1 × 1,800mm 55mm → Scrap
1800
Remnant RMN-0094 1,860mm 1 × 1,800mm 55mm → Scrap
1800
Remnant RMN-0098 2,160mm 1 × 1,800mm 355mm → Scrap
1800
355mm
Mill length 7300mm mill length 7,300mm 1 × 1,800mm 5,465mm → New remnant RMN-0126
1800
5465mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0093 | 1,860mm | 1 | 1,800mm | 55mm | Scrap |
| 2 | Remnant RMN-0094 | 1,860mm | 1 | 1,800mm | 55mm | Scrap |
| 3 | Remnant RMN-0098 | 2,160mm | 1 | 1,800mm | 355mm | Scrap |
| 4 | Mill length 7300mm mill length | 7,300mm | 1 | 1,800mm | 5,465mm | New remnant RMN-0126 |
| Total | 4 | 7.20m | 5.95m | |||