Yield
99.8%
of the metal used up
First-pass use
60.7%
before anything went back
Scrap
0.06kg
$1 of metal
Off the rack
3.01m
$93 not bought new
Back on the rack
3
7.69m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0082 5,165mm 1 × 3,000mm 2,160mm → New remnant RMN-0101
3000
2160mm
Mill length 7300mm mill length 7,300mm 2 × 3,000mm 1,260mm → New remnant RMN-0102
3000
3000
1260mm
Mill length 7300mm mill length 7,300mm 1 × 3,000mm 4,265mm → New remnant RMN-0103
3000
4265mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0082 | 5,165mm | 1 | 3,000mm | 2,160mm | New remnant RMN-0101 |
| 2 | Mill length 7300mm mill length | 7,300mm | 2 | 3,000mm | 1,260mm | New remnant RMN-0102 |
| 3 | Mill length 7300mm mill length | 7,300mm | 1 | 3,000mm | 4,265mm | New remnant RMN-0103 |
| Total | 4 | 12.00m | 7.71m | |||