Yield
99.8%
of the metal used up
First-pass use
56.4%
before anything went back
Scrap
0.04kg
$0 of metal
Off the rack
2.71m
$62 not bought new
Back on the rack
3
8.29m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0091 4,565mm 1 × 2,700mm 1,860mm → New remnant RMN-0093
2700
1860mm
Mill length 7300mm mill length 7,300mm 2 × 2,700mm 1,860mm → New remnant RMN-0094
2700
2700
1860mm
Mill length 7300mm mill length 7,300mm 1 × 2,700mm 4,565mm → New remnant RMN-0095
2700
4565mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0091 | 4,565mm | 1 | 2,700mm | 1,860mm | New remnant RMN-0093 |
| 2 | Mill length 7300mm mill length | 7,300mm | 2 | 2,700mm | 1,860mm | New remnant RMN-0094 |
| 3 | Mill length 7300mm mill length | 7,300mm | 1 | 2,700mm | 4,565mm | New remnant RMN-0095 |
| Total | 4 | 10.80m | 8.31m | |||