Cut plan CP-26-0334

Yield

94.9%

of the metal used up

First-pass use

77.8%

before anything went back

Scrap

2.85kg

$38 of metal

Off the rack

5.82m

$150 not bought new

Back on the rack

6.21m returned

How it nested

Each length that was opened, what came out of it, and what was left.

Cut 524mm · 5mm kerf · 30mm end trim on a new bar

Remnant RMN-0070 5,833mm 11 × 524mm 14mm → Scrap

Mill length 7300mm mill length 7,300mm 13 × 524mm 393mm → Scrap

393mm

Mill length 7300mm mill length 7,300mm 13 × 524mm 393mm → Scrap

393mm

Mill length 7300mm mill length 7,300mm 13 × 524mm 393mm → Scrap

393mm

Mill length 7300mm mill length 7,300mm 2 × 524mm 6,212mm → New remnant RMN-0072

524

6212mm

into the ramp saw kerf back on the rack scrap end trim

The cut list

What the saw operator works from.

#	Take from	Its length	Cuts	At	Left	Then
1	Remnant RMN-0070	5,833mm	11	524mm	14mm	Scrap
2	Mill length 7300mm mill length	7,300mm	13	524mm	393mm	Scrap
3	Mill length 7300mm mill length	7,300mm	13	524mm	393mm	Scrap
4	Mill length 7300mm mill length	7,300mm	13	524mm	393mm	Scrap
5	Mill length 7300mm mill length	7,300mm	2	524mm	6,212mm	New remnant RMN-0072
Total			52	27.25m	7.67m