Yield
93.4%
of the metal used up
First-pass use
78.1%
before anything went back
Scrap
2.58kg
$34 of metal
Off the rack
1.72m
$44 not bought new
Back on the rack
1
3.84m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0057 2,001mm 4 × 424mm 285mm → Scrap
424
424
424
424
Mill length 7300mm mill length 7,300mm 16 × 424mm 406mm → Scrap
406mm
Mill length 7300mm mill length 7,300mm 16 × 424mm 406mm → Scrap
406mm
Mill length 7300mm mill length 7,300mm 8 × 424mm 3,838mm → New remnant RMN-0063
3838mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0057 | 2,001mm | 4 | 424mm | 285mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 16 | 424mm | 406mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 16 | 424mm | 406mm | Scrap |
| 4 | Mill length 7300mm mill length | 7,300mm | 8 | 424mm | 3,838mm | New remnant RMN-0063 |
| Total | 44 | 18.66m | 5.16m | |||