Yield
94.7%
of the metal used up
First-pass use
73.6%
before anything went back
Scrap
2.03kg
$27 of metal
Off the rack
3.43m
$89 not bought new
Back on the rack
1
5.55m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0048 3,438mm 8 × 424mm 6mm → Scrap
Mill length 7300mm mill length 7,300mm 16 × 424mm 406mm → Scrap
406mm
Mill length 7300mm mill length 7,300mm 16 × 424mm 406mm → Scrap
406mm
Mill length 7300mm mill length 7,300mm 4 × 424mm 5,554mm → New remnant RMN-0054
424
424
424
424
5554mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0048 | 3,438mm | 8 | 424mm | 6mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 16 | 424mm | 406mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 16 | 424mm | 406mm | Scrap |
| 4 | Mill length 7300mm mill length | 7,300mm | 4 | 424mm | 5,554mm | New remnant RMN-0054 |
| Total | 44 | 18.66m | 6.59m | |||