Yield
97.8%
of the metal used up
First-pass use
85.8%
before anything went back
Scrap
1.11kg
$15 of metal
Off the rack
6.71m
$173 not bought new
Back on the rack
1
3.44m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0047 6,841mm 14 × 474mm 135mm → Scrap
Mill length 7300mm mill length 7,300mm 15 × 474mm 85mm → Scrap
Mill length 7300mm mill length 7,300mm 15 × 474mm 85mm → Scrap
Mill length 7300mm mill length 7,300mm 8 × 474mm 3,438mm → New remnant RMN-0048
3438mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0047 | 6,841mm | 14 | 474mm | 135mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 15 | 474mm | 85mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 15 | 474mm | 85mm | Scrap |
| 4 | Mill length 7300mm mill length | 7,300mm | 8 | 474mm | 3,438mm | New remnant RMN-0048 |
| Total | 52 | 24.65m | 4.00m | |||