Yield
91.6%
of the metal used up
First-pass use
54.6%
before anything went back
Scrap
1.67kg
$22 of metal
Off the rack
2.15m
$55 not bought new
Back on the rack
1
6.84m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0044 2,480mm 5 × 424mm 335mm → Scrap
424
424
424
424
424
335mm
Mill length 7300mm mill length 7,300mm 16 × 424mm 406mm → Scrap
406mm
Mill length 7300mm mill length 7,300mm 1 × 424mm 6,841mm → New remnant RMN-0047
424
6841mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0044 | 2,480mm | 5 | 424mm | 335mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 16 | 424mm | 406mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 1 | 424mm | 6,841mm | New remnant RMN-0047 |
| Total | 22 | 9.33m | 7.69m | |||