Yield
95.6%
of the metal used up
First-pass use
91.0%
before anything went back
Scrap
2.62kg
$29 of metal
Off the rack
6.61m
$313 not bought new
Back on the rack
1
0.66m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0013 3,380mm 1 × 3,300mm 75mm → Scrap
3300
Remnant RMN-0010 3,820mm 1 × 3,300mm 515mm → Scrap
3300
515mm
Mill length 7300mm mill length 7,300mm 2 × 3,300mm 660mm → New remnant RMN-0046
3300
3300
660mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0013 | 3,380mm | 1 | 3,300mm | 75mm | Scrap |
| 2 | Remnant RMN-0010 | 3,820mm | 1 | 3,300mm | 515mm | Scrap |
| 3 | Mill length 7300mm mill length | 7,300mm | 2 | 3,300mm | 660mm | New remnant RMN-0046 |
| Total | 4 | 13.20m | 1.27m | |||