Yield
99.8%
of the metal used up
First-pass use
63.6%
before anything went back
Scrap
0.06kg
$1 of metal
Off the rack
3.01m
$93 not bought new
Back on the rack
3
6.79m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0103 4,265mm 1 × 3,000mm 1,260mm → New remnant RMN-0112
3000
1260mm
Mill length 7300mm mill length 7,300mm 2 × 3,000mm 1,260mm → New remnant RMN-0113
3000
3000
1260mm
Mill length 7300mm mill length 7,300mm 1 × 3,000mm 4,265mm → New remnant RMN-0114
3000
4265mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0103 | 4,265mm | 1 | 3,000mm | 1,260mm | New remnant RMN-0112 |
| 2 | Mill length 7300mm mill length | 7,300mm | 2 | 3,000mm | 1,260mm | New remnant RMN-0113 |
| 3 | Mill length 7300mm mill length | 7,300mm | 1 | 3,000mm | 4,265mm | New remnant RMN-0114 |
| Total | 4 | 12.00m | 6.81m | |||