Yield
99.2%
of the metal used up
First-pass use
80.9%
before anything went back
Scrap
0.15kg
$2 of metal
Off the rack
2.41m
$55 not bought new
Back on the rack
1
2.16m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0095 4,565mm 1 × 2,400mm 2,160mm → New remnant RMN-0098
2400
2160mm
Mill length 7300mm mill length 7,300mm 3 × 2,400mm 55mm → Scrap
2400
2400
2400
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0095 | 4,565mm | 1 | 2,400mm | 2,160mm | New remnant RMN-0098 |
| 2 | Mill length 7300mm mill length | 7,300mm | 3 | 2,400mm | 55mm | Scrap |
| Total | 4 | 9.60m | 2.24m | |||