Yield
98.3%
of the metal used up
First-pass use
84.4%
before anything went back
Scrap
0.42kg
$6 of metal
Off the rack
0.00m
$0 not bought new
Back on the rack
1
2.00m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Mill length 7300mm mill length 7,300mm 15 × 474mm 85mm → Scrap
Mill length 7300mm mill length 7,300mm 11 × 474mm 2,001mm → New remnant RMN-0057
2001mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Mill length 7300mm mill length | 7,300mm | 15 | 474mm | 85mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 11 | 474mm | 2,001mm | New remnant RMN-0057 |
| Total | 26 | 12.32m | 2.22m | |||