Yield
94.8%
of the metal used up
First-pass use
79.5%
before anything went back
Scrap
1.33kg
$17 of metal
Off the rack
7.66m
$198 not bought new
Back on the rack
1
2.48m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Remnant RMN-0037 1,960mm 4 × 474mm 44mm → Scrap
474
474
474
474
Remnant RMN-0036 2,840mm 5 × 474mm 445mm → Scrap
474
474
474
474
474
445mm
Remnant RMN-0038 3,410mm 7 × 474mm 57mm → Scrap
Mill length 7300mm mill length 7,300mm 10 × 474mm 2,480mm → New remnant RMN-0044
2480mm
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Remnant RMN-0037 | 1,960mm | 4 | 474mm | 44mm | Scrap |
| 2 | Remnant RMN-0036 | 2,840mm | 5 | 474mm | 445mm | Scrap |
| 3 | Remnant RMN-0038 | 3,410mm | 7 | 474mm | 57mm | Scrap |
| 4 | Mill length 7300mm mill length | 7,300mm | 10 | 474mm | 2,480mm | New remnant RMN-0044 |
| Total | 26 | 12.32m | 3.16m | |||