Yield
99.0%
of the metal used up
First-pass use
98.6%
before anything went back
Scrap
0.71kg
$8 of metal
Off the rack
0.00m
$0 not bought new
Back on the rack
0
0.00m returned
How it nested
Each length that was opened, what came out of it, and what was left.
Mill length 7300mm mill length 7,300mm 2 × 3,600mm 60mm → Scrap
3600
3600
Mill length 7300mm mill length 7,300mm 2 × 3,600mm 60mm → Scrap
3600
3600
into the ramp saw kerf back on the rack scrap end trim
The cut list
What the saw operator works from.
| # | Take from | Its length | Cuts | At | Left | Then |
|---|---|---|---|---|---|---|
| 1 | Mill length 7300mm mill length | 7,300mm | 2 | 3,600mm | 60mm | Scrap |
| 2 | Mill length 7300mm mill length | 7,300mm | 2 | 3,600mm | 60mm | Scrap |
| Total | 4 | 14.40m | 0.14m | |||